Skip to content
RoofElm

Solar

Rooftop solar: size it, price it, then read your utility's rules

The federal credit is gone, net metering depends on your utility, and the roof comes first. Here is how to check a quote.

By RoofElm Editorial Team Updated 7 min read

Federal 25D credit
Ended after 2025
Net metering
Set by your utility
Roof age
Check before panels
System size
Measured in kilowatts
Illustration: a house with rooftop solar panels, an inverter, a meter and arrows showing power to the house and to the grid
Power the house uses first, and the rest goes to the grid under your utility's rules.

In short

The federal 25D credit for rooftop solar does not apply to systems placed in service after December 31, 2025, so a 2026 quote cannot count on it. What the system saves you now depends on how much of its output you use yourself and what your utility pays for the rest, and net metering rules differ by state and by utility. Look at the roof's age before you look at panels, and run any quote through the solar payback calculator.

What a rooftop solar job includes

A rooftop system is more than panels. It starts with a site survey of the roof, the shade and your main electrical panel. Then comes a design, a permit, an application to your utility to connect to the grid, the installation, an inspection, and a written approval from the utility before you switch the system on.

  • Panels and racking: the modules and the rails that attach them to the rafters, with flashing at each roof penetration.
  • Inverter: turns the panels' direct current into the alternating current your house uses.
  • Wiring and electrical work: done under an electrical permit, and in most places by a licensed electrician.
  • Monitoring: an app or portal that shows how much the system produces.
  • Interconnection: the utility's approval to operate. Running the system before you have it can break the rules.

The roof is part of the job even when no roofer is hired. Read solar panels and roof age before you collect quotes.

Sizing the system

System size is measured in kilowatts, the combined rating of the panels. What you care about is kilowatt-hours a year: how much electricity the system makes compared with the amount you use. The formula is output divided by use. Ask the installer for the annual output estimate and the assumptions behind it, such as shade, tilt and direction. Then pull your own annual use from your utility bills.

Example: made-up numbers to show the arithmetic
StepMathResult
Panels for a 6 kilowatt system at 400 watts each6,000 ÷ 40015 panels
Share of your use covered8,000 ÷ 10,000 kWh80%
Used in the house, at 20 cents per kWh5,000 × 0.20$1,000 a year
Sent to the grid, at 8 cents per kWh3,000 × 0.08$240 a year
Yearly value1,000 + 240$1,240

A roof facing south usually produces more over a year than one facing north in the continental United States, but shade, tilt and roof space decide a lot. Check the estimate against the sun your roof really gets.

Net metering varies by utility

When your panels make more than the house uses, the extra goes to the grid. What the utility pays you for it is the most important rule in your quote, and it is set by your state and your utility, not by the installer. Some places credit the extra at close to the retail rate. Others pay a lower export rate, or change rates by time of day. Rules also change, and an older system may be treated differently from a new one.

How utilities credit extra solar power
ApproachHow it worksWhat to ask the utility
Net meteringExtra power offsets what you use later, often at the retail rate.Is the credit one for one, and when does it expire?
Net billing or export rateExtra power is credited at a set rate, often lower.What is the rate and can it change?
Time-of-use ratesPrice changes by hour.When does the system produce versus when do I use?

Ask your utility, in writing, for its current rules for new solar customers, and ask the installer which rule the estimate uses. The state pages on state help show solar property tax rules where we have checked them.

Money: the federal credit has ended

The federal credit under section 25D covered a share of the cost of rooftop solar on homes, and the law passed in July 2025, the One Big Beautiful Bill Act, ended it for property placed in service after December 31, 2025. If a salesperson says you can still claim it for a 2026 install, ask them to put the section and the reason in writing. Do not sign on that promise.

What remains varies by place: some states or utilities have rebates, some exempt the added home value from property tax, and Texas, for example, exempts it by application under Tax Code section 11.27. See your state's page and how energy rebates and weatherization work. The simple payback formula is the net cost you pay divided by the value of the output in a year. Use your numbers in the solar payback calculator.

Roof, shade and structure

Panels sit on the roof for a long time. A roof that needs replacement soon should be replaced before the panels go on, or the panels must come off and go back on later. Look also at shade from trees and chimneys, the space between vents and edges, and the rafters under the array. Ask the installer how they will keep the attic vents clear and how they flash each penetration. Roof replacement covers what a tear-off includes.

  • Roof age and condition: curling or missing shingles, soft spots and stained decking are fixed first.
  • Shade: look at the roof at several hours of the day and in winter, when the sun is low.
  • Structure: ask who checked that the rafters can carry the array, and what they found.
  • Insurance: tell your homeowner's insurer about the system and ask whether the policy changes.

What to ask before you sign

  1. Ask each installer for the system size, the annual output estimate and the assumptions behind it.
  2. Ask which net metering or export rule the estimate uses, and ask your utility to confirm it.
  3. Ask for the panel and inverter brands, the warranties for each, and the installer's workmanship warranty for the roof penetrations, in writing.
  4. Ask who pulls the permit, who applies to the utility, and when you will have permission to operate.
  5. Ask what happens to the contract and the system if you sell the house.
  6. Compare bids line by line with the estimate reading guide, and be wary of pressure to sign today.

Rooftop solar is not a do-it-yourself job for most owners: it means working at height, connecting to the electric service and getting a utility approval. We do not sell solar or refer installers.

Common questions

Can I still claim the federal solar tax credit?

Not for a system placed in service after December 31, 2025. The 25D credit ended under the law passed in July 2025. Ask any seller who says otherwise for the section and the reason, in writing.

What is net metering?

It is the utility's rule for crediting power your panels send to the grid. It differs by state and by utility, so ask your utility for the current rule for new solar customers.

Should I replace my roof before installing solar?

If the roof will need replacing soon, usually yes, because panels would have to be removed and reinstalled later. Have a roofer look at it first.

Does solar raise my property tax?

It depends on your state. Some states exempt the value added by solar, some by application, some not at all. Check your state page and your county assessor.

Sources

Reference list checked on November 19, 2026 for relevance. The end of the 25D credit for property placed in service after December 31, 2025 comes from the law passed in July 2025. This article gives no prices or utility rates on purpose: they change, so get your utility's current rules in writing.