Skip to content
RoofElm

Yard

Landscaping: plan first, call 811, then dig

How to plan a yard project, what to do before any hole is dug, how deep mulch goes, and what a landscaper's bid should say.

By RoofElm Editorial Team Updated 7 min read

Before any digging
Call 811
Mulch depth (Maryland)
1 to 3 inches
Mulch from a trunk
About 3 inches away
USDA hardiness map
2023 edition
Illustration: a yard plan view with planting beds, a lawn area, a path and marked utility lines
A yard plan with utility marks, beds, turf and a drainage path.

In short

Landscaping goes wrong when the plants come first. Start with a plan that fits your climate, soil and sun, call 811 before any digging so buried utility lines are marked, then plant, mulch and water. Mulch stays shallow and off the trunk. The EPA says turf receives the highest share of irrigation water in a traditional landscape, so deciding where grass has a job is the biggest water decision you make. For the grass itself, see lawn care.

What a landscaping project includes

Landscaping covers everything outside the house walls that is not a roof, a driveway or a fence. Small jobs are a bed of shrubs. Large ones add grading, drainage, paths, retaining walls, irrigation and trees. The scope matters because a bid for planting alone says nothing about the soil or the water.

  • Design and layout: a plan that shows beds, lawn, paths and where water goes.
  • Site work: grading, drainage, removing old plants and soil prep.
  • Hardscape: paths, patios, edging and retaining walls.
  • Planting: trees, shrubs, perennials and any new lawn.
  • Mulch and irrigation: the layer on top and the water supply under it.

Plan before you plant

The EPA's WaterSense brochure calls a landscape plan the first and most important step in a water-smart landscape. The plan should reflect your local climate, existing plants, terrain, how you use the space, each plant's water and sun needs and your soil. Draw it on paper first. A yard sketch with a tape measure is enough.

Pick plants that suit where you live. The USDA Plant Hardiness Zone Map, 2023 edition, is based on the average annual extreme minimum winter temperature. It tells you about winter cold for perennials and nothing about summer heat, rainfall, soil or annual plants, so pair it with your county extension office's plant lists.

The EPA also says to group plants by water need and to keep turf and shrub areas in separate watering zones, so each zone gets what it needs. It says to use turf where it has a practical function, such as play or recreation, and to choose a drought-tolerant grass that can go dormant. Fewer square feet of lawn means less to mow, water and feed.

Call 811 before any digging

Anyone who plans to dig should call 811 or use their state 811 center's website, according to the national 811 education site. You request marks a few business days before digging, and state laws vary, so check your state's 811 center for the exact waiting period. Each utility has its own paint or flag color, and the marks show the approximate path of buried lines.

Hand-digging near a mark and trenching across the yard are different jobs. Ask the previous owner or the original installer for plans of your own irrigation or lighting lines, and dig those areas by hand.

Mulch: depth, distance and volume

University of Maryland Extension says to keep mulch shallow, from 1 to 3 inches, with bark and wood chips at 1 to 3 inches and pine straw at 2 to 3 inches. It says to keep mulch about 3 inches from a tree trunk, because mulch should never touch the trunk, and to apply it out to the spread of the branches where possible. The EPA adds that too much mulch can restrict water flow to roots and says to replace mulch around shrubs and garden plants at least once a year.

Worked example: mulch for a 200 square foot bed
DepthCubic feetCubic yards
1 inch16.70.62
2 inches33.31.23
3 inches50.01.85

The math: 200 square feet times the depth in inches divided by 12 gives cubic feet, and a cubic yard is 27 cubic feet. For your own bed, put the area and depth into the yard and concrete calculator, which also adds a waste allowance. Delivery by the cubic yard is usually simpler than bags once you need more than a yard or two.

Water-smart design

The EPA says nearly 8 billion gallons a day, about 30 percent of household water, goes to outdoor use nationally. Its brochure says up to 50 percent of the water applied to lawns and gardens can be lost to evaporation, wind and runoff. It also says households with in-ground sprinkler systems used about 50 percent more water than households without them, and that a hand-held hose is generally the most water-efficient way to water, with microirrigation the most efficient automatic option.

None of this says to skip irrigation. It says to design it for the plants you chose, and to set the controller by season. Ask for a WaterSense labeled controller if you are installing a system. Where water collects against the house after rain, that is a drainage job, and gutters and drainage is the place to start.

Order of work and what to ask

  1. Walk the yard and sketch it with measurements, sun, shade and where water runs.
  2. Call 811 and wait for the marks. Look up your city's rules on permits for grading, retaining walls and tree removal, which vary by locality. See permits and inspections.
  3. Do the hard work first: grading, drainage, paths and walls.
  4. Install irrigation before planting, then plant.
  5. Mulch last, at the depth and distance above.
  6. Ask the landscaper for the plant list with sizes, the mulch depth, the warranty period on plants and who waters them while they establish.

Check how a landscaper is licensed. Licensing rules differ by state and city, so look at your state page and the contractor hiring guide.

Scope and size

Square feet, the number of plants and how much hardscape you want drive labor and materials.

Site work

Grading, drainage fixes, old plant removal and hauling take more time than planting.

Plant size

Larger trees and shrubs cost more up front and need less waiting.

Common questions

Do I need to call 811 to plant a shrub?

If the hole is more than a surface scrape, the 811 site says to call before you dig, because some lines are buried shallowly. Check your state's 811 center for its waiting period.

How deep should mulch be?

University of Maryland Extension says 1 to 3 inches, kept about 3 inches back from a tree trunk. The EPA warns that too much mulch can restrict water flow to roots.

What does the USDA hardiness zone tell me?

It tells you the average annual extreme minimum winter temperature for your location, which helps you pick perennials. It does not cover summer heat, rainfall, soil or annual plants.

Does landscaping need a permit?

It depends on the work and the place. Grading, retaining walls, tree removal and drainage changes are the jobs most likely to need one, and the rules differ by city and county, so call your building office before you start.

Sources

Facts checked on November 19, 2026 against the pages above. Utility-marking rules, permits and plant lists vary by state and locality: confirm with your state 811 center, your building office and your county extension office.