Yard
Lawn care, measured by the inch and the pound
How high to mow, how much water to put down, how to turn a fertilizer bag into pounds of nitrogen, and what to ask a lawn service.
By RoofElm Editorial Team Updated 7 min read
- Mowing limit per cut
- One-third of the blade
- Water a week (Illinois)
- 1 to 1.5 inches
- Nitrogen per feeding
- 1 lb per 1,000 sq ft
- Outdoor share of home water
- 30% nationally
In short
A healthy lawn mostly comes down to three habits: mow at the height your grass wants and never take off more than a third of the blade, water deeply and rarely instead of a little every day, and feed by the pound of nitrogen per 1,000 square feet rather than by the bag. Dates and amounts change with your grass and your region, so use your county extension office for the calendar. If water or low spots are the real trouble, look at gutters and drainage first.
What lawn care includes
Lawn care is a short list of repeating jobs. Most of the work is mowing, and most of the damage to home lawns comes from doing the other jobs at the wrong time or in the wrong amount.
- Mowing: the height and the frequency, set by the type of grass you have.
- Watering: how much, how often and at what hour.
- Feeding: nitrogen, plus anything a soil test says is missing.
- Aeration and thatch control: opening up compacted soil and removing a spongy layer when it builds up.
- Weeds and bare spots: seeding or patching, and treating weeds.
Know your grass before anything else. Cool-season grasses such as Kentucky bluegrass, ryegrass and fescue grow hardest in spring and fall. Warm-season grasses such as Bermudagrass, St. Augustinegrass and zoysia grow hardest in summer. Your county extension office, part of the land-grant university system, can tell you which grows locally and publishes a lawn calendar for your area.
Mowing height and the one-third rule
University of Illinois Extension says to remember not to remove more than one-third of the grass leaf in a single cutting. Utah State University Extension gives the same limit and says to lower an overgrown lawn gradually over several mowings. The practical result: pick a height, then mow before the grass is half again as tall as that.
| Grass | Type | Height | Source |
|---|---|---|---|
| Kentucky bluegrass | Cool-season | 2 to 3 inches | Illinois Extension |
| Tall fescue | Cool-season | 2.5 to 3.5 inches | Illinois Extension |
| Bermudagrass (common) | Warm-season | 1.5 to 3 inches | Texas A&M AgriLife |
| St. Augustinegrass | Warm-season | 2.5 to 4 inches | Texas A&M AgriLife |
| Zoysiagrass (coarse) | Warm-season | 1 to 2.5 inches | Texas A&M AgriLife |
Worked example: you keep tall fescue at 3 inches. One-third of the blade is the most you can cut, so the grass should be no taller than 4.5 inches when you mow, because 4.5 times two-thirds is 3. Illinois Extension also says a sharp blade cuts cleanly and reduces disease, and that clippings left on the lawn decompose and return nitrogen if you follow the one-third rule.
Watering: how much, when and how to check
Illinois Extension says a lawn generally needs about 1 to 1.5 inches of water a week to stay green and growing, counting rain, and that soil, weather and management change the number. Utah State suggests applying about half an inch to 1 inch per irrigation, with shorter cycles about an hour apart if water puddles or runs off. Both say to water early in the day and to skip midday, when much of the water evaporates. Illinois Extension adds that night watering can promote some turf diseases.
- Set out coffee cans or straight-sided containers, run the sprinkler for 30 minutes and measure the water in them. That tells you the inches per hour your system applies.
- Water to reach the weekly total in one or two sessions rather than a little every day.
- Push a long screwdriver into the soil a few hours later. How far it goes shows how deep the water soaked.
- Decide whether you will water through summer or let the lawn go dormant, and stay with that choice. Illinois Extension warns that breaking dormancy drains the plant's food reserves.
A volume check: one inch of water over 1,000 square feet is 1,000 divided by 12, or about 83 cubic feet. At about 7.48 gallons per cubic foot, that is about 623 gallons. The U.S. Environmental Protection Agency says outdoor use is about 30 percent of household water nationally and can be much higher in drier regions. If you have an in-ground system, the EPA recommends WaterSense labeled controllers, which cut overwatering.
Feeding: a soil test, then nitrogen math
Illinois Extension says its soils often have enough phosphorus and recommends focusing on nitrogen unless a soil test shows another shortage. Your state extension office or land-grant lab can tell you where to send a sample. For most full-sun lawns it suggests about 3 pounds of nitrogen per 1,000 square feet over the growing season, no more than 1 pound of quick-release nitrogen at any one feeding, and about half as much for a shaded lawn. Utah State puts typical home lawns at 2 to 3 pounds a year. The two states differ, which is the point: use your own state's number.
Timing differs too. Illinois names late summer to early fall as the key window for cool-season grass: August 15 to September 15 in the central part of that state. Utah State lists April, June and October in both of its regions. A warm-season lawn follows a different calendar again, so check with your county office.
| Step | Math | Result |
|---|---|---|
| Nitrogen needed | 5,000 ÷ 1,000 × 1 lb | 5 lb of nitrogen |
| Bag labeled 25% nitrogen | 5 ÷ 0.25 | 20 lb of product |
| Bag labeled 10% nitrogen | 5 ÷ 0.10 | 50 lb of product |
The first number on a fertilizer label is the percent nitrogen, so the pounds of product are the pounds of nitrogen you want divided by that percent. Over-applying nitrogen can burn grass and cause excess top growth that invites disease, according to Illinois Extension.
Aeration, thatch, weeds and bare spots
Utah State says aeration improves water infiltration and reduces compaction and thatch, and gives spring and fall windows for its regions. The right months depend on your grass, so follow your county calendar. Illinois Extension says clippings do not cause thatch, so skip the bagger unless the lawn is overgrown.
Weeds and bare spots mostly follow thin turf. A thick lawn mowed at the right height shades out many weeds, and seeding is easiest in the season your grass grows hardest. If you bring in topsoil to level low spots, work out the volume first. For example, a 400 square foot patch filled 2 inches deep takes 400 times 2 divided by 12, or about 67 cubic feet, which is about 2.5 cubic yards. The yard and concrete calculator does that arithmetic for topsoil, mulch and gravel. If the low spot holds water after rain, fix the drainage before you reseed.
Hiring a lawn service or doing it yourself
Mowing, watering and a soil test are easy DIY work. Spreader work is manageable if you follow the label. Weed and pest products are where it pays to be careful: read the label, and if you hire someone to apply them, ask whether your state requires the applicator to be licensed. Rules differ by state, so check your state agriculture department.
- Ask what each visit includes, the mowing height in inches, and whether clippings stay on the lawn.
- Ask for the fertilizer plan by pounds of nitrogen per 1,000 square feet and by month, not just a number of visits.
- Ask for proof of liability insurance, sent by the insurer.
- Ask how the service handles a drought or watering restriction in your city.
- Compare bids line by line using the estimate reading guide, and use the contractor hiring guide for license and insurance checks.
Lawn size
Square feet drive the time on the mower and the amount of product.
Grass and condition
Thin turf, heavy weeds or compacted soil add work before regular care starts.
Visit schedule
Weekly mowing, seasonal feeding and one-time jobs such as aeration are priced differently.
Common questions
How short should I cut my grass?
It depends on the grass. Extension tables give 2 to 3 inches for Kentucky bluegrass and 2.5 to 3.5 for tall fescue, and 2.5 to 4 inches for St. Augustinegrass. Cut to the recommended height for your type, and never remove more than a third of the blade at once.
How much should I water my lawn?
Illinois Extension says about 1 to 1.5 inches a week, including rain, to keep a cool-season lawn green. Measure what your sprinkler applies with straight-sided cans, and water early in the day.
When should I fertilize?
It depends on your grass and region. For cool-season grass in central Illinois the key window is mid-August to mid-September. Check your county extension calendar, and take a soil test before you add anything beyond nitrogen.
Should I bag my clippings?
Usually not. Illinois Extension says clippings decompose, do not cause thatch and return nitrogen when you follow the one-third rule.
Sources
- University of Illinois Extension: Mowing your lawn
- University of Illinois Extension: Watering your lawn
- University of Illinois Extension: Fertilizing your lawn
- Utah State University Extension: Basic turfgrass care
- Texas A&M AgriLife Extension: Turf cutting height
- EPA WaterSense: How we use water
- EPA WaterSense: Outdoors
Facts checked on November 19, 2026 against the pages above. Amounts and dates are from the Illinois, Utah and Texas extension services and change with grass type and region: use your own county extension office for your calendar.
Next on the job
-
Project
Landscaping
Plan the yard, call 811, mulch at the right depth and water wisely before you hire.
-
Project
Gutters and drainage
How gutters and downspouts work, a worked rainfall example, and what to ask an installer.
-
Guide
Read a contractor estimate
Scope, named materials, allowances and exclusions: what every home improvement bid should say.